Water treatment for Vernon and the North Okanagan

Home » Services » Water Softeners » WaterBoss 700 Water Softener with Built-In Sediment Filter

WaterBoss

Supplied and installed

WaterBoss 700 Water Softener with Built-In Sediment Filter

A compact whole-house water softener for well or city water that also reduces up to 10 ppm of clear-water iron and filters out dirt and sediment.

Get a quote for your home

Every system is sized to your water and quoted after a free water test, including installation.

Not sure this is the right system? Book a free water test.

Downloads: Owner's manual (PDF)

Already own one?

Replacement parts for this system ship free on orders of $100 or more.

About this system

The WaterBoss 700 is the most compact model in the WaterBoss whole-house line. It softens water with up to 70 grains per gallon of hardness, reduces up to 10 ppm of ferrous (clear-water) iron and traps dirt and sediment in a self-cleaning filter media bed, so there are no filter cartridges to change.

The cabinet holds the resin tank and up to 100 lb of salt in one unit that stands 25.5 in tall on a 15 x 19 in footprint, which suits laundry rooms and utility closets. It works on well or city water and is rated for 8 gpm of service flow.

Regeneration is demand-initiated: the controller tracks water use and regenerates only when capacity is needed. At the lowest salt setting a regeneration uses about 1.1 lb of salt and 19.4 gallons of water. The unit is efficiency rated to NSF/ANSI 44.

The system runs on a 12 V transformer and connects with 1 in male NPT fittings through the included bypass valve. Plan on topping up the salt cabinet with clean white pellet, cube-style or solar salt.

Okanagan Aquatech tests your water, sizes the softener to your household and installs and services the system.

Features

  • Softens up to 70 gpg of hardness
  • Reduces up to 10 ppm of clear-water (ferrous) iron
  • Built-in self-cleaning sediment filter media; no cartridges
  • Demand-initiated regeneration from about 1.1 lb of salt
  • 100 lb salt storage in an all-in-one cabinet
  • Efficiency rated to NSF/ANSI 44
  • Installation kit includes bypass valve, drain line, 12 V transformer, overflow elbow and water test kit

Specifications

Maximum compensated hardness 70 gpg (1,200 mg/L)
Maximum ferrous iron reduction 10 ppm (manual footnote: Wisconsin limits iron reduction claims to 5 ppm)
Minimum pH 7
Media Self-cleaning filter media and super fine mesh resin, 0.7 cu ft (20 L) total
Capacity by salt setting 5,105 grains at 1.1 lb; 15,640 grains at 6.5 lb; 18,759 grains at 12 lb
Water used per regeneration 19.4 gal (73.4 L) at 1.1 lb; 30.7 gal at 6.5 lb; 36.2 gal at 12 lb
Regeneration time 20:30 min at 1.1 lb; 34:00 at 6.5 lb; 43:00 at 12 lb
Rated salt efficiency 4,641 grains/lb at 1.1 lb salt and 8 gpm (NSF/ANSI 44 efficiency rating)
Service flow rate 8 gpm (30 L/min)
Pressure drop at 8 gpm 15 psi (1.0 bar)
Maximum drain flow during backwash 2.0 gpm (7.6 L/min)
Water pressure 20–80 psi (1.4–5.5 bar)
Minimum water flow required 2.0 gpm (7.6 L/min)
Water and ambient temperature 40–100 °F (4–38 °C)
Maximum chlorine 0.0 ppm (per manual)
Regeneration type Demand-initiated
Salt storage 100 lb (45 kg)
Dimensions 15 x 19 in footprint, 25.5 in high (38 x 48 x 65 cm)
Electrical 12 VAC, 50/60 Hz, 0.015 kWh (12 V transformer included)
Plumbing connections 1 in male NPT
Shipping weight 85 lb (39 kg)
Warranty Limited warranty from WaterBoss: 5 years on mechanical and electronic parts; 10 years on the media tank, main control valve and brine cabinet (media not warranted). Per the owner’s manual, page 29.

Maintenance

Keep salt in the cabinet using clean white pellet, cube-style or solar salt (owner’s manual). The filter media is cleaned during each regeneration, so there are no filter cartridges to replace.

Downloads