Water treatment for Vernon and the North Okanagan

Home » Services » Reverse Osmosis & Drinking Water Systems » Reo-Pure EC 5-Stage Reverse Osmosis Drinking Water System

Reo Pure

Supplied and installed

Reo-Pure EC 5-Stage Reverse Osmosis Drinking Water System

An under-sink reverse osmosis system with a sediment filter, two carbon block pre-filters, a 50 GPD membrane and a carbon post-filter, with a 4.4 gallon storage tank and faucet.

Get a quote for your home

Every system is sized to your water and quoted after a free water test, including installation.

Not sure this is the right system? Book a free water test.

Downloads: Spec sheet (PDF) · Brochure (PDF) · Owner's manual (PDF)

Already own one?

Replacement parts for this system ship free on orders of $100 or more.

About this system

The Reo-Pure EC 5-Stage is an under-sink reverse osmosis (RO) system for drinking and cooking water. Water passes a 5 micron sediment filter and two 10 micron carbon block pre-filters, which reduce chlorine and protect the membrane. The RO membrane then rejects dissolved solids, sodium, chromium, arsenic, copper, lead and cysts such as Giardia and Cryptosporidium. Treated water is held in a storage tank and passes an inline carbon post-filter on its way to the faucet.

The second carbon pre-filter gives the membrane longer protection where chlorine levels are high and stretches the time between filter changes. An automatic shut-off valve stops feed water when the tank is full. The system can also supply a refrigerator or ice maker.

Reo-Pure systems are designed and assembled in the USA by Great Lakes International. They use standard cartridge and membrane sizes and arrive fully assembled with a long-reach chrome faucet, storage tank and installation parts.

Okanagan Aquatech installs the system under your sink and handles filter changes. GLI recommends replacing the pre- and post-filters every 6 to 12 months; the membrane can last several years.

Features

  • Five stages including two carbon block pre-filters
  • 50 GPD thin film composite membrane
  • Automatic shut-off when the tank is full
  • Long-reach chrome faucet and 4.4 gallon tank included
  • Can feed a refrigerator or ice maker
  • Standard-size cartridges and membrane
  • Assembled in the USA

Specifications

Stages 1: sediment pre-filter, 5 micron; 2 and 3: carbon block pre-filters, 10 micron; 4: RO membrane; 5: inline carbon GAC post-filter
Membrane production 50 GPD standard (25, 100 and 150 GPD available); RE-1812-50 element
Nominal TDS rejection 98% (spec sheet); 96 to 98% NaCl rejection (manual)
Recovery 25% (at test conditions)
Storage tank 4.4 gallon
Dimensions (L x D x H) 16 x 6 x 17 in (system only)
Feed water pressure 45 to 100 psi (pressure regulator if pressure can exceed 85 psi; booster pump below 45 psi)
Feed water temperature 40 to 90 °F (4.4 to 32 °C)
Feed water limits TDS below 1,000 ppm; hardness up to 10 gpg; iron below 0.5 ppm; manganese below 0.05 ppm; chlorine below 0.1 mg/L; hydrogen sulfide 0; turbidity below 1.0 NTU; pH 3.0 to 11.0
Fittings John Guest quick connect (90406) or JACO compression (90405)
Manufacturer warranty 1-year limited (GLI)

Maintenance

GLI: replace pre- and post-filters every 6 to 12 months; the RO membrane can last several years. Sanitize the system and tank at filter changes per the manual.

Replacement parts

  • 14815502 sediment filter, 5 micron
  • 149251010 carbon block filter, 10 micron (2 required)
  • 602050 RO membrane, 50 GPD
  • 13515503 inline carbon post-filter

Downloads