The Franklin FSCF1 stacks a carbon filter tank on top of a water softener tank and runs both from one control valve. Water passes through the granular activated carbon first, which reduces chlorine taste and odour and protects the softener resin below from chlorine damage. The softened water then returns through the valve to the house.
The FSCF1-1035-B holds 1.0 cu ft of high-capacity resin and 0.3 cu ft of carbon. It delivers 24,000 grains of softening capacity at the factory salt setting and 30,000 grains at the maximum setting. The 220 lb brine tank has a salt platform that keeps salt dry and a safety brine valve that prevents overflow.
The valve is modular, so most service work needs no tools and a two-handle bypass lets you draw untreated water when needed. It connects to 3/4 or 1 in plumbing; 3/4 in quick-connect fittings and 1 in male NPT elbows are included. It needs a 115/120 V outlet and a nearby drain.
When the carbon is spent, the top tank can be removed and refilled with fresh carbon. Okanagan Aquatech installs and services this system.
Features
- Carbon filter and softener on one control valve
- Carbon pre-treats water and protects the resin from chlorine
- Modular valve; most repairs need no tools
- Full-flow two-handle bypass valve
- Replaceable top carbon tank
- 220 lb brine tank with salt platform and safety brine valve
- Fibreglass and stainless steel construction
Specifications
| Model | FSCF1-1035-B |
|---|---|
| Media | 1.0 cu ft high capacity resin; 0.3 cu ft granular activated carbon |
| Capacity | 24,000 grains at factory salt setting (9 lb/cu ft); 30,000 grains at maximum (15 lb/cu ft) |
| Flow rate (manual) | Continuous 3 gpm; service 8 gpm (≤15 psi drop); peak 19 gpm (20 psi drop) |
| Pressure loss | 2 psi at continuous; 6 psi at service; 19 psi at peak flow |
| Backwash and rapid rinse | 2.7 gpm (manual); spec sheet lists 2.2 gpm |
| Brine draw / rinse | 0.38 / 0.5 gpm (blue injector) |
| Salt per regeneration (factory) | 9 lb |
| Water used per regeneration (factory) | 62 gal |
| Factory regeneration time | 2:00 a.m. |
| Carbon tank | 10 x 18 in |
| Resin tank | 10 x 35 in |
| Brine tank | 18 x 33 in; 220 lb salt capacity |
| Overall dimensions | 18 x 28 x 63 in (L x W x H) |
| Pipe size | 3/4 in and 1 in; 3/4 in quick-connect fittings and 1 in male NPT elbows included |
| Water pressure | 25–100 psi (1.7–6.9 bar) |
| Water temperature | 33–100 °F (0.5–37.7 °C) |
| Electrical | 115/120 V, 60 Hz uninterrupted outlet, dry location |
| Valve service flow with bypass and meter | 20 gpm at 15 psig drop |
| Shipping weight | About 100 lb |
| Warranty | 1 year entire conditioner; 5 years control valve (except seal and spacer kit); 5 years brine tank; 10 years mineral tank (Franklin Ten Year Limited Warranty) |
Maintenance
Keep salt in the brine tank. The control valve seal and spacer kit is treated as a wear part under the warranty.
Replacement parts
- V1FWDME control valve (less bypass)
- PJ12X40HS granular carbon
- ZGC110 high capacity resin
- WC918EBL2 carbon tank
- WC1035EBL resin tank
- D1203 media screen
- V3006 bypass valve
- BT2 brine tank assembly
- BV safety brine valve assembly




