Water treatment for Vernon and the North Okanagan

Home » Services » Reverse Osmosis & Drinking Water Systems » Reo-Pure EC 4-Stage Reverse Osmosis Drinking Water System

Reo Pure

Supplied and installed

Reo-Pure EC 4-Stage Reverse Osmosis Drinking Water System

A compact under-sink reverse osmosis system with a sediment filter, carbon block pre-filter, 50 GPD membrane and carbon post-filter, supplied with a 4.4 gallon tank and faucet.

Get a quote for your home

Every system is sized to your water and quoted after a free water test, including installation.

Not sure this is the right system? Book a free water test.

Downloads: Spec sheet (PDF) · Brochure (PDF) · Owner's manual (PDF)

Already own one?

Replacement parts for this system ship free on orders of $100 or more.

About this system

The Reo-Pure EC 4-Stage is a compact under-sink reverse osmosis (RO) system for drinking and cooking water. A 5 micron sediment filter removes dirt, silt and rust, then a 10 micron carbon block filter reduces chlorine and the compounds behind bad tastes and odours. The 50 GPD RO membrane rejects dissolved solids, sodium, chromium, arsenic, copper, lead and cysts such as Giardia and Cryptosporidium. An inline carbon post-filter gives the water a final polish after the storage tank.

An automatic shut-off valve closes the feed water when the 4.4 gallon tank is full, so the system only sends water to drain while it is making water. The unit uses standard cartridge and membrane sizes and comes fully assembled with a long-reach chrome faucet.

Reo-Pure systems are designed and assembled in the USA by Great Lakes International. This four-stage model suits most city and treated well water; the five-stage version adds a second carbon pre-filter for water with heavy chlorine.

Okanagan Aquatech installs the system and looks after filter changes. GLI recommends replacing the pre- and post-filters every 6 to 12 months; the membrane can last several years.

Features

  • Four-stage RO with 50 GPD membrane
  • 10 micron carbon block pre-filter
  • Automatic shut-off when the tank is full
  • Long-reach chrome faucet and 4.4 gallon tank included
  • Standard-size cartridges and membrane
  • Assembled in the USA

Specifications

Stages 1: sediment pre-filter, 5 micron; 2: carbon block pre-filter, 10 micron; 3: RO membrane; 4: inline carbon GAC post-filter
Membrane production 50 GPD (25, 100 and 150 GPD available)
Nominal TDS rejection 98% (spec sheet); 96 to 98% NaCl rejection (manual)
Recovery 25% (at test conditions)
Storage tank 4.4 gallon
Dimensions (L x D x H) 13 x 6 x 17 in (system only)
Feed water pressure 45 to 100 psi
Feed water temperature 40 to 90 °F
Feed water limits TDS below 1,000 ppm; iron below 0.5 ppm; manganese below 0.05 ppm; chlorine below 0.1 mg/L; hydrogen sulfide 0; turbidity below 1.0 NTU; pH 3.0 to 11.0
Fittings John Guest quick connect (90404) or JACO compression (90403)
Manufacturer warranty 1-year limited (GLI)

Maintenance

GLI: replace pre- and post-filters every 6 to 12 months; the RO membrane can last several years.

Replacement parts

  • 14815502 sediment filter, 5 micron
  • 149251010 carbon block filter, 10 micron
  • 602050 RO membrane, 50 GPD
  • 13515503 inline carbon post-filter

Downloads