The WaterBoss 950 is the WaterBoss model built for municipal water. Its mixed media bed combines super fine mesh softening resin with activated carbon and redox media, so it softens water with up to 35 grains per gallon of hardness and reduces chlorine taste and odour at the same time. It handles up to 3 ppm of chlorine.
A self-cleaning filter bed traps dirt and sediment, so there are no cartridges to change. The cabinet stores 120 lb of salt and stands 30.5 in tall on a 15 x 19 in footprint. Rated service flow is 8 gpm.
Regeneration is demand-initiated. At the lowest salt setting a regeneration uses about 1.1 lb of salt and 20.7 gallons of water. The 950 is efficiency rated to NSF/ANSI 44. For iron-bearing well water, the 700 or 900 is the better fit.
The system runs on a 12 V transformer and connects with 1 in male NPT fittings through the included bypass valve.
Okanagan Aquatech tests your water, sets up the softener and installs and services the system.
Features
- Softens up to 35 gpg of hardness
- Activated carbon and redox media reduce chlorine taste and odour (up to 3 ppm chlorine)
- Built-in self-cleaning sediment filter media; no cartridges
- Demand-initiated regeneration from about 1.1 lb of salt
- 120 lb salt storage in an all-in-one cabinet
- Efficiency rated to NSF/ANSI 44
Specifications
| Maximum compensated hardness | 35 gpg (600 mg/L) |
|---|---|
| Maximum ferrous iron reduction | 0 ppm |
| Maximum chlorine | 3.0 ppm |
| Minimum pH | 7 |
| Media | Redox media 4 lb (1.8 kg), activated carbon 0.25 cu ft (7 L), super fine mesh resin 0.7 cu ft (20 L); 1 cu ft (28 L) total |
| Capacity by salt setting | 4,980 grains at 1.1 lb; 18,615 grains at 6.5 lb; 18,805 grains at 12 lb |
| Water used per regeneration | 20.7 gal (78.4 L) at 1.1 lb; 23.2 gal at 6.5 lb; 42.5 gal at 12 lb |
| Regeneration time | 20:30 min at 1.1 lb; 34:00 at 6.5 lb; 43:00 at 12 lb |
| Rated salt efficiency | 4,527 grains/lb at 1.1 lb salt and 8 gpm (NSF/ANSI 44 efficiency rating) |
| Service flow rate | 8 gpm (30 L/min) |
| Pressure drop at 8 gpm | 12.6 psi (0.87 bar) |
| Maximum drain flow during backwash | 3.0 gpm (11.4 L/min) |
| Water pressure | 20–80 psi (1.4–5.5 bar) |
| Minimum water flow required | 3.0 gpm (11.4 L/min) |
| Water and ambient temperature | 40–100 °F (4–38 °C) |
| Regeneration type | Demand-initiated |
| Salt storage | 120 lb (54 kg) |
| Dimensions | 15 x 19 in footprint, 30.5 in high (38 x 48 x 78 cm) |
| Electrical | 12 VAC, 50/60 Hz, 0.015 kWh (12 V transformer included) |
| Plumbing connections | 1 in male NPT |
| Shipping weight | 105 lb (48 kg) |
| Warranty | Limited warranty from WaterBoss: 5 years on mechanical and electronic parts; 10 years on the media tank, main control valve and brine cabinet (media not warranted). Per the owner’s manual, page 29. |
Maintenance
Keep salt in the cabinet using clean white pellet, cube-style or solar salt (owner’s manual). There are no filter cartridges to replace.




