HydraPlus Professional Series softeners are built in Kamloops by HomePlus Products around the HydraPlus controller, which sits on a Clack WS series valve body. The valve meters water use and regenerates only when capacity is needed, which keeps salt and water use down. It logs water consumption and has a backlit display with battery back-up. The backwash and regeneration cycles can be set to suit the water.
Each system pairs the valve with a Pentair Polyglass or Clack media tank, a Clack brine tank and one of six media. Four are Purolite resins: C100E for typical well or city water, C100X10 for heavier chlorine or chloramine, C100EFM fine mesh for higher iron and SSTC6000E Shallow Shell for very hard water or high iron. Two are Ecosoft Ecomix blends that also reduce iron and manganese and in the Ecomix C version low levels of tannins.
Sizes run from 0.75 to 3 cu ft of resin. At the factory salt setting that gives 16,500 to 66,000 grains of capacity and optimal service flows of 3.7 to 15 gpm. For hardness above 45 grains per gallon, HomePlus recommends a twin alternating system.
A bypass and 1 in NPT elbow fittings come standard. Okanagan Aquatech tests your water, chooses the media and tank size and installs and services the system.
Features
- Clack WS series valve body with HydraPlus metered controller
- Six sizes from 0.75 to 3 cu ft of resin
- Choice of six media from Purolite and Ecosoft
- Water consumption data logging and service reminders
- Battery back-up holds settings through power outages
- Bypass and 1 in NPT fittings included
- Optional EZSalt Wi-Fi salt level monitor, Vortech tank upgrade and no-raw-water bypass
Specifications
| Control valve | HydraPlus controller on Clack WS series valve body; metered (demand) regeneration; 6-cycle programmable; battery back-up; two relays for accessories |
|---|---|
| Tanks | Pentair Polyglass or Clack media tank; Clack brine tank |
| Sizes (model suffix) | 8-44, 9-48, 10-54, 12-52, 13-54, 14-65 |
| Resin volume | 0.75, 1, 1.5, 2, 2.5, 3 cu ft (8-44 to 14-65) |
| Capacity at factory salt dose (6 lb/cu ft) | 16,500 / 22,000 / 33,000 / 44,000 / 55,000 / 66,000 grains (8-44 to 14-65) |
| Capacity at 15 lb/cu ft | 24,750 / 33,000 / 49,500 / 66,000 / 82,500 / 99,000 grains |
| Salt per regeneration at 6 lb/cu ft | 4.5 / 6 / 9 / 12 / 15 / 18 lb |
| Optimal service flow rate | 3.7 / 5.0 / 7.5 / 10 / 12.5 / 15 gpm |
| Maximum service flow rate | 5.6 / 7.5 / 11.2 / 15 / 18.7 / 22.5 gpm |
| Backwash flow rate (40 °F / 70 °F water) | 1.7/2.2, 2.2/2.7, 2.7/3.2, 4.2/4.2, 5.3/6.5, 6.5/7.5 gpm |
| Maximum hardness | 45 gpg / 770 mg/L (twin alternating recommended above this) |
| Media limits: WS-8-HP (Purolite C100E) | Iron 3 ppm, manganese 1 ppm, chlorine 1 ppm, chloramine none |
| Media limits: WS-10-HP (Purolite C100X10) | Iron 3 ppm, manganese 1 ppm, chlorine 2 ppm, chloramine 1 ppm |
| Media limits: WS-FM (Purolite C100EFM fine mesh) | Iron 5 ppm, manganese 1.5 ppm, chlorine 1 ppm, chloramine none |
| Media limits: WS-SST (Purolite SSTC6000E) | Iron 10 ppm, manganese 3 ppm, chlorine 1 ppm, chloramine none |
| Media limits: WS-EMP (Ecomix P) | Iron 7 ppm, manganese 2 ppm, chlorine 1 ppm, tannin 0.1 ppm, TOC 3 ppm |
| Media limits: WS-EMC (Ecomix C) | Iron 3 ppm, manganese 1 ppm, chlorine 1 ppm, tannin 0.5 ppm, TOC 5 ppm |
| Ecomix models capacity at factory salt dose | 11,500 / 17,000 / 23,000 / 28,500 / 34,500 grains (9-48 to 14-65) |
| Water pressure | 20–90 psi; 40–70 psi recommended (pressure reducing valve recommended above 70 psi) |
| Water temperature | 40–100 °F (4–38 °C) |
| Minimum air temperature | 38 °F (4 °C); must not freeze |
| pH range | 5–10 (pH correction recommended below 7.0) |
| Connections | Bypass assembly and 1 in NPT elbows (Clack V3007) included; 3/4 and 1 in NPT, SharkBite, John Guest and sweat options available |
| Warranty | Control valve 5 years; media tanks up to 13 in diameter 10 years, 14 in and larger 5 years; other components 1 year; no warranty on media (owner’s manual, page 41) |
Maintenance
Keep salt in the brine tank. The seals, spacers and piston need periodic servicing or replacement, generally every 2 to 5 years (owner’s manual, page 38). Replace the resin or media on the schedule your water treatment professional recommends.
Replacement parts
- Clack V3011 WS1 piston assembly, downflow
- Clack V3005-02 WS1 spacer stack assembly
- Clack V3007 1 in NPT elbow fittings




