Water treatment for Vernon and the North Okanagan

Home » Services » Reverse Osmosis & Drinking Water Systems » Reo-Pure LP3 Series Light Commercial Reverse Osmosis Systems

Reo Pure

Supplied and installed

Reo-Pure LP3 Series Light Commercial Reverse Osmosis Systems

Compact frame-mounted reverse osmosis systems producing 50 to 1,750 gallons per day for homes with high demand, offices, restaurants and light commercial use.

Get a quote for your home

Every system is sized to your water and quoted after a free water test, including installation.

Not sure this is the right system? Book a free water test.

Downloads: Spec sheet (PDF) · Owner's manual (PDF)

Already own one?

Replacement parts for this system ship free on orders of $100 or more.

About this system

The Reo-Pure LP3 Series is a line of frame-mounted reverse osmosis (RO) systems for applications beyond a single kitchen tap, such as whole-home RO supply, restaurants, offices and light commercial processes. Models produce from 50 to 1,750 gallons per day at 50% recovery with 98 to 99% nominal salt rejection.

Every unit is built on a powder-coated aluminum frame with Pentek slim line sediment and carbon pre-filter housings, a Fluid-O-Tech rotary vane pump and a high-efficiency motor. A water-saving recirculation loop returns part of the concentrate to the pump to raise recovery. Safety and control features include a low feed pressure switch, a product water pressure switch, a feed solenoid valve, a manual membrane flush valve and gauges for pre-filter, post-filter and operating pressure.

The 50 to 200 GPD models use 10 inch housings and a single 2 x 12 inch membrane. The 225 to 1,750 GPD models use 20 inch housings and larger membranes and can be ordered with an intelligent controller that adds automatic membrane flushing, tank-full indication and a pretreatment lockout. Options include atmospheric tank connection, stainless steel or lead-free builds and TDS monitors.

Okanagan Aquatech sizes the model to your daily demand and feed water, then installs and services it.

Features

  • 50 to 1,750 GPD models
  • Powder-coated aluminum frame
  • Water-saving recirculation loop for 50% recovery
  • Low feed pressure and product water pressure switches
  • Fluid-O-Tech rotary vane pump
  • Optional intelligent controller with automatic membrane flush (225 to 1750)
  • Assembled in the USA

Specifications

Capacity (GPD / GPM) LP3-50 50/0.04; LP3-100 100/0.07; LP3-200 200/0.14; LP3-225 225/0.16; LP3-350 350/0.24; LP3-500 500/0.35; LP3-750 750/0.52; LP3-1000 1,000/0.69; LP3-1750 1,750/1.22
Membrane TFC polyamide, high flux. 50 to 225: 2 x 12 in; 350: 2.5 x 21 in; 500: 2 x 26 in; 750: 2.5 x 40 in; 1000: 4 x 21 in; 1750: 4 x 40 in (one element each)
Recovery 50% design
Nominal TDS rejection 98 to 99%
Pre-filtration Sediment and carbon; Pentek 10 in slim line housings (50 to 200), 20 in slim line (225 to 1750)
Pump Fluid-O-Tech rotary vane; 60 to 320 GPH by model (225 to 1750)
Electrical 115 V, 60 Hz, 1 phase standard (5 to 10.4 A on 225 to 1750); 220 V, 50 Hz optional
Pressure switches Low feed 15 off / 20 on psi; product 45 off / 25 on psi
Connections (225 to 1750) Inlet 3/8 in FNPT (225 to 500) or 1/2 in FNPT (750 to 1750); product and drain 3/8 in tube (1/2 in on 1750)
Dimensions (50 to 200) 12 x 17 x 22 in (L x D x H)
Feed water temperature 40 to 90 °F (5 to 30 °C)
Feed water pressure 40 to 85 psi
Feed water limits TDS below 2,000 ppm; hardness 10 gpg; iron 0.01 ppm (dissolved); manganese below 0.05 ppm; chlorine below 0.1 ppm; hydrogen sulfide must be removed; turbidity below 1 NTU; pH 3 to 11; potable sources only
Manufacturer warranty 1-year limited (GLI)

Downloads