HydraPlus carbon filters treat the whole house with coconut shell granular activated carbon (GAC). The carbon removes chlorine along with trihalomethanes (THMs) and haloacetic acids (HAAs), the by-products that form when chlorine reacts with natural organic matter in city water. It also takes out many organic compounds responsible for bad tastes and odours, so water tastes the same at every tap and skin and hair are spared the drying effect of chlorine.
HomePlus uses acid-washed coconut shell carbon from Karbonous Inc., validated to NSF/ANSI Standard 61. Acid washing removes water-soluble impurities and cuts down the carbon fines released when the filter is first put into service. The media sits in a North American tank under a HydraPlus control valve on a Clack WS valve body, which runs a metered backwash to keep the bed clean.
There are no cartridges to change. Okanagan Aquatech sizes the tank to your household flow rate, installs it with the included bypass valve and services it when the carbon is due for replacement.
Features
- Removes chlorine taste and smell at every tap
- Reduces THMs and HAAs
- Acid-washed coconut shell carbon validated to NSF/ANSI 61
- No filter cartridges to replace
- Automatic metered backwash
- Optional Vortech tank and no-raw-water bypass valve
Specifications
| Models | GAC-HP-8-44, GAC-HP-9-48, GAC-HP-10-54, GAC-HP-12-52, GAC-HP-13-54, GAC-HP-14-65 |
|---|---|
| Media | Acid-washed coconut shell granular activated carbon (Karbonous Inc.), validated to NSF/ANSI Standard 61 |
| Media volume | 0.75, 1, 1.5, 2, 2.5 and 3 cu ft (by tank size, per HomePlus model listing) |
| Optimal service flow | 3.5, 4.4, 5.5, 7.9, 9.2 and 10.7 gpm (by tank size) |
| Maximum service flow | 5.2, 6.6, 8.2, 11.8, 13.8 and 16.0 gpm |
| Backwash flow at 40 °F / 70 °F | 3.2/4.2 gpm (8-44) to 10/13 gpm (14-65) |
| pH range | 7.0 to 8.5 |
| Operating pressure | 20 to 90 psi; 40 to 70 psi recommended (pressure reducing valve recommended above 70 psi) |
| Water temperature | 4 to 38 °C (40 to 100 °F) |
| Minimum air temperature | 4 °C (38 °F); must not be exposed to freezing |
| Control valve | HydraPlus controller on a Clack WS valve body: metered backwash, 6-cycle programming, back-lit display, service reminders, battery back-up, 2 accessory relays |
| Connections | Bypass valve and 1 inch NPT elbows (Clack V3007) included; 3/4 and 1 inch NPT, SharkBite, John Guest and sweat fittings available |
| Electrical | Standard grounded 120 V, 60 Hz outlet |
| Manufacturer warranty | Control valve 5 years limited; media tank 10 years up to 13 in diameter, 5 years at 14 in and larger; other components 1 year; no warranty on media or gravel (per HydraPlus manual) |
Maintenance
No cartridges. Carbon media is replaced when exhausted; neither document states an interval. Valve seals and piston are periodic wear items.
Replacement parts
- V3011 Clack WS1 piston assembly, downflow
- V3005-02 Clack WS1 seal and spacer stack




