The UltraPlus+ UP-12 is a whole-house ultrafiltration (UF) system for very fine filtration. Its membrane rejects particles down to 0.02 microns absolute, which covers fine sediment, turbidity, colloids and cysts such as Cryptosporidium and Giardia. It is especially effective on the fine clays and rock flour found in some shale wells and glacial streams, which conventional filters let through. It can also reduce certain organics and tannins.
Inside the vessel are four polysulfone hollow-fibre UF modules with water flowing from the outside in. The system runs on normal line pressure and delivers up to 10 gpm continuously and 12 gpm at peak. The membrane elements are made in France and validated to NSF/ANSI Standard 61.
A Pentair Fleck 5800 XTR2 valve with a colour touch-screen controls the cleaning cycle. Once a day, usually overnight, it back flushes the membrane with about 10 gallons of treated water from a small pressure tank, then runs a short forward flush. The valve also tracks flow and water use and includes leak detection.
The full package includes the back flush tank and a quick installation kit. Okanagan Aquatech installs it after any iron, softening or tannin treatment and ahead of UV, which HomePlus recommends as a second disinfection barrier.
Features
- Filtration to 0.02 microns absolute
- Up to 10 gpm continuous, 12 gpm peak
- Removes cysts, colloids and rock flour
- Automatic daily back flush uses about 10 gallons
- Fleck 5800 XTR2 touch-screen valve with leak detection and water use data
- Keeps filtering during a power outage
- Membrane life typically 5 to 10 years
Specifications
| Model | UP-12-5800-FULL (auto back flush, auto forward flush, install kit and back flush tank) |
|---|---|
| Membrane | Polysulfone hollow fibre, 4 bundles, outside-to-inside flow |
| Micron rating | 0.02 microns absolute |
| Molecular weight cut-off | 100,000 Daltons |
| Continuous service flow | Up to 10 gpm |
| Peak flow | 12 gpm (at 25 °C and 60 psi) |
| Operating pressure | 10 to 100 psi (consult dealer below 30 psi; pressure reducing valve above 100 psi) |
| Operating temperature | 35 to 100 °F (2 to 38 °C); must not freeze |
| Back flush | 2 gpm for 5 minutes, daily (about 10 gallons) |
| Typical membrane life | 5 to 10 years |
| Control valve | Pentair Fleck 5800 XTR2 with colour LCD touch-screen |
| Back flush tank | Wellmate WM-9 (Flexcon CSS-35 may be substituted); minimum about 30 gallon tank with 10 gallon drawdown if supplying your own |
| Inlet / outlet | 1 inch MNPT |
| Drain | 3/4 inch MNPT |
| Electrical | Standard grounded 120 V, 60 Hz outlet |
| Feed water requirements | Sediment pre-filtration 5 microns or less; chlorine 1.0 ppm max continuous; iron below 0.30 ppm; manganese below 0.05 ppm; silt density index below 6.0; pH 3 to 11 |
| Component validations | UF membrane NSF/ANSI 61; membrane vessel NSF/ANSI 44 (materials and structural integrity); control valve NSF/ANSI 44 and 372; back flush tank NSF/ANSI 61 |
| Manufacturer warranty | Membrane vessel 3 years pro-rated; control valve 5 years; Wellmate WM-9 tank 5 years (residential); other components 1 year (Canada and USA) |
Maintenance
Automatic daily back flush and forward flush. Keep the 5 micron pre-filter changed. HomePlus states typical membrane life of 5 to 10 years; the replacement membrane is UP-12-REPL.
Replacement parts
- UP-12-REPL UltraPlus+ replacement UF membrane





