Water treatment for Vernon and the North Okanagan

Home » Services » Backwashing Filters & Cartridges » HydraPlus Tannin and Organics Filter

Supplied and installed

HydraPlus Tannin and Organics Filter

A salt-regenerated whole-house filter that removes tannins and natural organics behind tea-coloured water, with a mineral layer that keeps the treated water at a neutral pH.

Get a quote for your home

Every system is sized to your water and quoted after a free water test, including installation.

Not sure this is the right system? Book a free water test.

Downloads: Spec sheet (PDF) · Owner's manual (PDF)

Already own one?

Replacement parts for this system ship free on orders of $100 or more.

About this system

Tannins and other natural organics are common in water from lakes, streams and shallow wells. They tint water yellow or orange and stain laundry and they form disinfection by-products such as THMs when the water is chlorinated. The HydraPlus T-HP filter removes tannins, lignins and other organics using Purolite A860 anion exchange resin.

Anion treatment often leaves water acidic. HydraPlus adds a layer of specialized mineral media below the resin to keep the treated water at a neutral pH, which protects plumbing from corrosion.

Like a water softener, the filter regenerates with salt from a brine tank. The HydraPlus control valve on a Clack WS valve body meters regeneration to water use and comes set for a high salt efficiency dose of 6 lb per cubic foot. HomePlus states a media life of 5 to 10 years.

The system includes the media tank, brine tank, bypass valve and 1 inch fittings. Okanagan Aquatech sizes it from a water test, installs it and keeps it serviced. Salt top-ups are the only routine task for the homeowner.

Features

  • Removes tannins, lignins and natural organics
  • Prevents tea-coloured water and laundry staining
  • Neutralizing mineral layer keeps treated water at a neutral pH
  • Purolite A860 anion exchange resin
  • Metered regeneration set for 6 lb salt per cu ft
  • Media life typically 5 to 10 years

Specifications

Models T-HP-9-48, T-HP-10-54, T-HP-12-52, T-HP-13-54, T-HP-14-65
Media Purolite A860 anion exchange resin plus neutralizing mineral media
Resin volume 0.75, 1.25, 1.5, 2 and 2.5 cu ft (by tank size)
Neutralizing media volume 0.25, 0.25, 0.5, 0.5 and 0.5 cu ft
Total media volume 1, 1.5, 2, 2.5 and 3 cu ft
Salt per regeneration 6, 9, 12, 15 and 18 lb (at 6 lb per cu ft)
Optimal service flow 2.5, 4.5, 5.5, 7 and 9 gpm (by tank size)
Maximum service flow 4, 6.5, 7.5, 10 and 12.5 gpm
Backwash flow at 40 °F / 70 °F 1.7/1.7 gpm (9-48) to 2.7/3.2 gpm (14-65)
pH range 5.0 to 10
Maximum tannin 5 ppm
Maximum TOC 15 ppm
Maximum iron 0.3 ppm
Maximum manganese 0.05 ppm
Maximum chlorine 1 ppm
Maximum chloramine None
Operating pressure 20 to 90 psi; 40 to 70 psi recommended (pressure reducing valve recommended above 70 psi)
Water temperature 4 to 38 °C (40 to 100 °F)
Minimum air temperature 4 °C (38 °F); must not be exposed to freezing
Control valve HydraPlus controller on a Clack WS valve body: metered backwash, 6-cycle programming, back-lit display, service reminders, battery back-up, 2 accessory relays
Connections Bypass valve and 1 inch NPT elbows (Clack V3007) included; 3/4 and 1 inch NPT, SharkBite, John Guest and sweat fittings available
Electrical Standard grounded 120 V, 60 Hz outlet
Manufacturer warranty Control valve 5 years limited; media tank 10 years up to 13 in diameter, 5 years at 14 in and larger; other components 1 year; no warranty on media or gravel (per HydraPlus manual)

Maintenance

Keep salt in the brine tank. HomePlus states media life of 5 to 10 years. Valve seals and piston are periodic wear items.

Replacement parts

  • Purolite A860 resin and neutralizing media (replacement bed)
  • V3011 Clack WS1 piston assembly, downflow
  • V3005-02 Clack WS1 seal and spacer stack

Downloads