Water treatment for Vernon and the North Okanagan

Home » Services » Backwashing Filters & Cartridges » HydraPlus MetSorb Arsenic and Heavy Metal Reduction Filter

Supplied and installed

HydraPlus MetSorb Arsenic and Heavy Metal Reduction Filter

A whole-house backwashing filter using MetSorb titanium-dioxide media to remove arsenic, uranium, lead and other heavy metals from well water.

Get a quote for your home

Every system is sized to your water and quoted after a free water test, including installation.

Not sure this is the right system? Book a free water test.

Downloads: Spec sheet (PDF) · Owner's manual (PDF)

Already own one?

Replacement parts for this system ship free on orders of $100 or more.

About this system

HydraPlus MetSorb filters are built to remove arsenic from well water. MetSorb is a titanium dioxide adsorption media from Graver Technologies that binds both trivalent (arsenic III) and pentavalent (arsenic V) arsenic. The same bed also removes uranium and heavy metals including lead, cadmium, copper, chromium 6, selenium, antimony, mercury and zinc.

Because contaminants are permanently bound to the media, the periodic backwash does not carry concentrated arsenic and the discharge can go to a septic or sewer system. The backwash keeps the bed from channelling and clears trapped particles. A flow restrictor keeps the filter within its rated flow. Spent MetSorb has passed TCLP leaching tests and is landfill safe.

Media life depends on arsenic and metal levels, water use and chemistry; HomePlus states more than 7 years in most applications. Where total arsenic is above 60 parts per billion, HomePlus asks for sizing help, since a lead/lag pair or a larger tank may be needed. Okanagan Aquatech sizes the system from your water test, installs it and arranges media replacement when the time comes.

Features

  • Removes arsenic III and arsenic V
  • Also removes uranium, lead and other heavy metals
  • Backwash water safe for septic or sewer
  • Spent media passed TCLP testing and is landfill safe
  • Flow restrictor keeps flow within rating
  • Media life over 7 years in most applications

Specifications

Models MS-HP-8-44, MS-HP-9-48, MS-HP-10-54, MS-HP-12-52, MS-HP-13-54, MS-HP-14-65
Media MetSorb titanium dioxide adsorption media (Graver Technologies)
Media volume 0.75, 1, 1.5, 2, 2.5 and 3 cu ft (by tank size, per HomePlus model listing)
Optimal service flow 1.7, 2.2, 2.7, 3.9, 4.6 and 5.3 gpm (by tank size)
Maximum service flow 3.5, 4.4, 5.5, 7.9, 9.2 and 10.7 gpm
Backwash flow at 40 °F / 70 °F 2.7/3.2 gpm (8-44) to 9/12 gpm (14-65)
Maximum pH 8.3
Maximum iron 0.3 ppm
Maximum manganese 0.5 ppm per brochure; 0.05 ppm per owner’s manual (see notes)
Arsenic sizing Contact dealer above 60 ppb (0.060 mg/L) total arsenic; lead/lag or larger media volume may be required
Operating pressure 20 to 90 psi; 40 to 70 psi recommended (pressure reducing valve recommended above 70 psi)
Water temperature 4 to 38 °C (40 to 100 °F)
Minimum air temperature 4 °C (38 °F); must not be exposed to freezing
Control valve HydraPlus controller on a Clack WS valve body: metered backwash, 6-cycle programming, back-lit display, service reminders, battery back-up, 2 accessory relays
Connections Bypass valve and 1 inch NPT elbows (Clack V3007) included; 3/4 and 1 inch NPT, SharkBite, John Guest and sweat fittings available
Electrical Standard grounded 120 V, 60 Hz outlet
Manufacturer warranty Control valve 5 years limited; media tank 10 years up to 13 in diameter, 5 years at 14 in and larger; other components 1 year; no warranty on media or gravel (per HydraPlus manual)

Maintenance

Media is replaced once its adsorption capacity is used; HomePlus states more than 7 years in most applications, depending on arsenic and metal levels, water use and chemistry. Valve seals and piston are periodic wear items.

Replacement parts

  • MetSorb media (replacement bed)
  • V3011 Clack WS1 piston assembly, downflow
  • V3005-02 Clack WS1 seal and spacer stack

Downloads